1 / 3
Improved Parametric Louder ESP32 Speaker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric model that can be easily adapted to available hardware
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (21)Powiązane
I built this streaming boombox for my bathroom as I already have squeezelite-based players in all other rooms that are fed by a Lyrion Music Server.
Bill of Material
- Louder-ESP32
https://www.tindie.com/products/sonocotta/louder-esp32/
But easily adaptable to other electronics of course. - 2x Visaton FR-7
https://www.visaton.de/de/produkte/chassis/breitband-systeme/fr-7-4-ohm
Should be easy to adapt for other speakers - Speaker Cloth, I used the following: https://de.aliexpress.com/item/1005007053654248.html
- 4x Rubber Feet, size is parametric, I used 9.5mm 3M Bumpon
- 6x Magnets, I used 8mm x 1.75 mm, but you can easily adapt the size in FreeCAD. 4
- Mounting Hardware. The model is configured for M3 heatset insert, but parameters can be changed to fit other screws. The PCB domes use M2 inserts, but this should be changed to M2.5.
- I used a USB-C to 12V 5.5x2.5mm DC Jack cable from AliExpress for the power supply. Please adapt the model to your need. You could also easily add a battery to it.
- Some gasket material to improve sealing. I plan to add printable gaskets in the future.
- Some dampening material to put inside the housing.
If you want to use the external antenna version, then you either need to cut out the hole in the backplate (closed by 0.5mm layer) or you can just change the pocket depth in the FreeCAD model.