Bambu Filament Cutter for EVA 3 - Exported
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same as the remix but exported for ease of use.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
15-20% Infill, any pattern.
Supports needed. I used tree and a 2mm brim
suggest PETG/ABS or better for heat resistance but PLA+ should be fine.
- Uses a #17 Xacto Blade. Like this…
- Any appropriately sized spring should work, I used a click pen spring with a bit of CA Glue on the body to keep it in place… I suggest THIS kit as its good to have some springs and its less than 10 USD.
- Use M3 Screws and Nuts to secure Hinge Body to Arm and Blade Body to Arm
The Hinge Body replaces the strap retainer on the right side of the print head.
Arranged model is best time-wise. I tried many different orientations but with 150mm's print speed it takes 4h2m at the above settings.