Parametric Tape Edge Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleeve that keeps tape edges clean from dust and dent‑free
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 283
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I'm constantly wrapping my insulating tapes in nylon to keep dust off.
Inspired by https://www.printables.com/model/1435426-side-protection-for-electrical-insulating-tape-sei, I designed a fully parametric, two‑part sleeve that snaps together and stays secure.
Print the parts with a filament that offers strong layer bonding (PLA+ or PETG works best).
Right after printing, assemble the two halves and give them a gentle twist‑pull to engage the interlocking mechanism; this makes removal easy once the tape is in place.
Parameters
Outer diameter – set about 1–2 mm larger than the tape width.
Inner diameter - set about 1 mm smaller than the tape's actual width for a snug fit.
Thickness - specify the exact wall thickness you need.
Please note:
In order to customize this, you'll need to have OpenSCAD (nightly builds recommended) with BOSL2 installed.