1 / 5
Emergency Stop for Ender 3 (Siemens Sirius ACT & Wago Winsta 890-702)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple housing for a Siemens Sirius ACT EStop that will fit on 4040 VSlot profiles on the Ender 3.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 734
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is simple housing for a Siemens Sirius ACT EStop that will fit on 4040 VSlot profiles on the Ender 3 and be secured by the sheet metal control board compartment. The two rectangular cutouts on the back cover are made to fit two WAGO WINSTA 890-702 sockets. The back cover is held on by two M5 bolts.
I personally am using it to switch after the power supply as the (meanwell) PSU will have enough power left in its capacitors to run the printer for about a second after the power is cut.
Parts list:
- 1x Siemens SIRIUS ACT 3SU1100-1HB20-1CG0(screw terminal) or 3SU1100-1HB20-3CH0(spring type terminal)
- 1x Siemens SIRIUS ACT 3SU1400-1AA10-3CA0(screw terminal) or 3SU1400-1AA10-3CA0(spring type terminal)
- 2x WAGO WINSTA 890-702
- 2x WAGO WINSTA 890-112
- 1x 1,5mm^2 dark blue wire (for DC 24V+) (if AC 230V use black for phase)
- 1x 1,5mm^2 dark blue/white wire (for DC 24V-) (if AC 230V use light blue for neutral)
- 2x M5 x 16mm bolts