Dinosaur Lantern Kit – T-Rex Parts for Granini Bottle St. Martin Lantern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,40 € – 0,49 € netto (bez VAT)
Dla pliku: Dino-Latern_p2_0.4n_0.2mm_PLA,PLA,PLA_MK4IS_22m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,44 € netto (środek widełek).
- Masa podana przez autora
- 7 g
- Czas druku podany przez autora
- 22,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Turn a Granini bottle into a cute T-Rex lantern – perfect for kids and St. Martin’s parade.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
When our toddler’s playgroup made St. Martin’s lanterns from empty Granini juice bottles using paint and a chestnut inside for swirling colors, I wanted to take it a step further. Our little one asked for a dinosaur lantern, so I designed these 3D-printed add-on parts to turn the bottle into a cute T-Rex!
This model includes:
- Two arms
- Two legs
- Two head halves (left & right)
- One tail with a spiky back ridge
All parts have a black outline for a fun, cartoon-like look that makes the dino friendly and child-appropriate. The pieces are lightweight and flat, printed in three 0,2 mm layers (0.6 mm total) to keep them flexible and allow easy gluing to the bottle.
Printing details:
- Created using SVG-based layered graphics (use Prusaslicer v2.7 or higher!)
- File is structured for single-extruder printers using virtual extruder color changes (no MMU required)
- Material: PLA or PETG (use caution with hot glue on PLA)
- Layer height: 0,2 mm
- Glue parts directly onto the bottle after painting and drying
This model transforms a simple DIY bottle lantern into a colorful, cheerful T-Rex that’s sure to stand out in any lantern parade!