Handle for bags and heavy loads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ergonomic pad on the bag strap to prevent injury to the palm
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sometimes you have to carry heavy luggage, but the bag's straps are made of thin fabric and can chafe your palms. In such cases, an ergonomic belt clip can be helpful. Here's an example of such a clip. It's designed to be permanently attached to the belt with a retaining insert.
Print with a 0.4 nozzle. It's best to split the insert into several pieces in a slicer to make printing easier. I split it into four pieces. Short parts printed vertically are less likely to be defective. Also, depending on your 3D printer, filament, and print settings, you may need to slightly reduce the insert size along the X and Y axes.