1 / 2
Qube 540 Headphone and USB drives holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An accesory for Qube 540 pc case to store your headphones and up to 6 usb sticks
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Easy to print accessory for your PC case. Parts slide together easily, no additional hardware required. Tested on printed front mesh as I don't own such case.
Supports are added in 3mf file, just set to “only forced supports”. If you are using different slicer, use refence above where they are needed.
Reccomended settings:
0.2 layer height
15% infill
PETG is preferable as the connecting points have tendency to snap when printed from PLA