1 / 2
Hyundai Santa Cruz Headrest Rod — zdjęcie 1
1 / 2

Hyundai Santa Cruz Headrest Rod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rod for attaching accessories after the headrest is removed

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
344
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

My Hyundai Santa Cruz had poor rearward visibility so I removed the headrests from the back seats. However I still needed the rods to attach accessories to. I designed these to fit my 2025 Hyundai Santa Cruz, this may work for other vehicles, though I'm not certain which makes/models . I used a diameter of 13.8mm for the rod.

I printed using 15% gyroid infill, 4 wall loops, and a 10mm outer brim using standard PLA. I have had really good luck with Bambu ABS-GF for car parts, though I suspect that would be unnecessary unless you're hanging something very heavy from these.

Tagi