Hadley Telescope - Sturdy Mount Azimuth Bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An azimuth bearing to allow more fine adjustment of the Hadley telescope on Ivan Urbánek's "Sturdy" mount.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An edit of c3n's azimuth bearing that is more in line with the visual language of the sturdy mount.
The assembly process is very similar. However, to join the Upper Bearing pieces I used 3 heat set inserts in the female side in place of nuts. This brings the bill of materials from c3n's post to:
- Bowden Tube (4mm OD, roughly ~390 mm give or take)
- (12) M4x10 machine screws (I opted to use longer screws to attach the bearing to the feet of the telescope)
- (9) M4 heat set inserts
- (3) M4 nuts
Optional:
- (3) M4x12 machine screws in place of (3) M4x10 screws
- (6) M4 washers for a more robust connection at the feet