1 / 4
UDR Window Net
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scale window net for the TRAXXAS 1/7 UDR unlimited desert racer
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Scale window nets for the TRAXXAS UDR.
Printing Instructions
- Material: TPU (I used 95A, but any durometer will work)
- Layer height: 0.15-0.30mm
- Walls: 1.2-1.8mm (3 to 4 Loops) make it solid
- Infill: 100% (should be solid with walls)
- Support: Disabled
- Orientation: As show below
- **Make sure the “netting” doesn't have a gap to the bed.
Hardware
Traxxas recommends 8x m2.5 x 8mm (TRAXXAS Window nets for the UDR)
If you don't have any m2.5 screws on hand m3 will work!
8x m3 x 6mm BHCS (button head cap screw) this is what i used on mine!
Assembly
- Remove the body - This video from Traxxas shows the process How to Remove the Body | Unlimited Desert Racer
- Remove the scale interior
- the top X-Brace will need to be removed
- Install the window nets
- Will require a little stretch to get the screw holes to line up
- The Screws will self tap into existing holes in the UDR frame
- Reassemble