1 / 8
Toyota Land Cruiser 40-series body lift kit — zdjęcie 1
1 / 8

Toyota Land Cruiser 40-series body lift kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Square/rectangular body lift blocks in OpenSCAD. Height, bolt hole diameter and outer diameter are customizable. I…

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
90
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Square/rectangular body lift blocks in OpenSCAD. Height, bolt hole diameter and outer diameter are customizable. I have not tested any 3D printed blocks on a vehicle, although some of the 3D printed TPU bushings have been used successfully, see notes in SCAD file.

3D printed block could be used for test fitting on a vehicle before committing to purchasing bar stock for machining. It could also be used as a sample for a machinist to reproduce in plastic (e.g. UHMW, Delrin, Nylon) or Aluminum. 1" UHMW bar source: https://amzn.to/3LEF02c 2" UHMW bar source: https://amzn.to/4oo39Zw

Or, you can import the OpenSCAD file into FreeCAD and then export any number of CAD file formats to send to an on-line machine shop such as Xometry, JLC3DP, etc.

If making lift blocks out of a plastic material, you can cut that material, in bar form, with the desired thickness and width, with a band saw, table saw or chop saw. Drill a hole in the middle and that's it. Later model 40-series vehicles may have round body mounts, so use the round body lift blocks. Don't have any information on the round body mount bushings, but the 2-piece round bushings listed below may work.

The BodyLift.txt file includes vehicle specific information such as number / size of body lift blocks and hardware requirements. This file will change over time as new information is added. If you have anything to add, post a MAKE with any additional details.

BodyLiftBlock1.scad can be used to make square (Detail=4) or round (Detail=100) lift blocks. BodyLiftBlock2.scad can be used to make the rectangular lift block that fits under the rear tailgate.

Photos show a 1" and 2" FJ40 body lift kit (blocks and bolts) along with a FJ45 kit with blocks, bolts and poly bushings.

More information: https://www.4crawler.com/4x4/ForSale/ToyotaLandcruiser.shtml#FJ-40

For poly bushings, the kits below work well: Energy Suspension 8-4104 https://amzn.to/42IHjGr Square mounts Energy Suspension 8-4102 https://amzn.to/42IRxse Round mounts

How I Designed This

https://youtu.be/AI1s2ypyZAI

Toyota Landcruiser 40-series Body Lift and Bushing Kits

Category: Automotive

Tagi