Creality carriage mount for Orbiter Extruder 1.5, Phaetus Dragonfly BMS, BLTouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality carriage mount for Orbiter Extruder 1.5, Phaetus Dragonfly BMS, BLTouch
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A mount which allows the Orbiter 1.5 and BLTouch to be mounted to the creality Ender 5 stock carriage (and other creality machines with the same carriage plate), aligned for the Phaetus Dragonfly BMS (the best all-metal hotend upgrade over the stock Creality hotend). A spacer is included so the Dragonfly hotend has clearance from the carriage and lines up with the extruder in the mount. This mount works with the stock metal fan shroud.
Lots of people say all metal hotends aren't as good for PLA, maybe that's true, but I haven't had a single hotend or extruder related problem since switching to this setup, something I couldn't say for the stock setup.
I printed both of these parts in eSun PLA+ and have hundreds of hours printing on them (with hotend temps up to 295 degC) and nothing has softened or warped.