Star Wars D-O Droid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is D-O from Star Wars. Total height is about 30 cm and all parts are separated by color.
- Ocena
- 5 / 5
- Polubienia
- 297
- Pobrania
- 923
- Wydruki
- 9
- Wyświetlenia
- 8115
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model is split in to several pieces to fit on to a printer with a build volume of 25 x 21 x 21 cm or 9,84 x 8,3 x 8,3 in. (Example Prusa MK3)
All parts are rotated for optimal printing with minimal supports.
Besides the printed parts you only need some filament strips and 6 mm black electric wire (for the side wire detail).
You can see more details in my build video:
https://www.youtube.com/watch?v=jT_OLkHsA_w
The model is split so you can print all parts in the right color and then assemble it.
Edit 24.04.2022:
Use 3-4 perimeters for the black rods and go really low infill and max 2 perimeters for all the parts above the head, otherwise it will be too heavy.
If your parts end up to heavy check out this remix by JPMakesStuff: https://www.printables.com/model/177328-star-wars-d-o-droid-head-support-block