Behringer BCF2000 / BCR2000 power button and collar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacements for eventually missing originals.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
A powerbutton and fitting collar for the BCF2000 and BCR2000 midi controllers, remixed from existing models by kemes and Mike (thank you).
I recommend printing with the faces that are seen from outside of the BCR/BCF flat on the plate, which I find nicer for appearance. No need for support for the collar, the power buttons printed well with auto supports for me.
/!\ I had to gently file the contact surface to minimize friction due to layer lines, and the collar part move a little on the controller due to me overestimating the thickness of the metal sheet of the controller housing: could be better but I'd rather upload this than nothing.