VW Caddy 5 - adjustable ball joint mount for the air vents below the central screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VW Caddy 5 - adjustable ball joint mount for the air vents below the central screen.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
FOR VW CADDY 5 *** FOR VW CADDY 5 *** FOR VW CADDY 5 *** FOR VW CADDY 5
snap on mount for the air vents below the central screen with a screw adjustable ball point.
It uses a M5x8 brass thread insert and a M5x12 screw. The rectangular size of the mounting plate is approx. 50mmx42mm - the four fixation holes are fitted for a M4-screw.
The two arms a glued into the base plate with “UHU Plast Special” (give it a good time to cure).
You can now easily attach any device or adapter while fastening it on the mounting plate.
I printed mine with PETG with 4 perimeters and 25% infill - perhaps ASA oder ABS would be better (we will see). I used support enforcers under the 4 hooks on the front and under on the two slots on the backside (organic).