Strada eXposure bicycle light mount adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bicycle light mount adapter for the Strada eXposure. This is only compatible with one very specific handlebar mount.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bicycle light mount adapter to get the Strada eXposure light to attach to a generic bike light mount.
It probably won't fit your mount, but you can change the design yourself in OnShape.
https://cad.onshape.com/documents/024dca82515cd0b42ece725e/w/7f9f17a5f65589605930c9ea/e/84ac4712368b2c6a955a724f?renderMode=0&uiState=690b8e0dfcafaa259d9a9f67
Make sure you print on the side, otherwise it could snap at the thinnest part along the layer lines. The 3mf files are oriented correctly for printing. You will therefore need to support the upper rail with organic supports.
Everything fit together nicely when printed on my MK4S in PETG, the slide-fit for the restraining ring has 0.1mm clearance on all sides.
- 0.22mm first layer
- 0.15mm layer height
- 3 perimeters for main mount
- 2 perimeters for restraining ring
- 15% infill
- Painted organic tree supports
- Brim: Auto generated mouse ear (I always add this)
- Bed 65*C first layer, 85*C after that (personal setting for PETG)
- Reduced flow by 0.86 for first layer (personal setting for PETG)