1 / 1
Prusa Core One Tool Holder (6x3 Magnets) and side left
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did this mod because the right side is occupied with filament drying and I had 6x3mm magnets.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 4
- Wyświetlenia
- 305
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (22)Powiązane
I did this mod because the right side is occupied with filament drying and I had 6x3mm magnets.