Badge & Cisco Duo FOB Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a badge holder, meant to attach to a lanyard, which secured a Cisco Duo FOB along with a standard ID badge.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
This badge holder is designed to contain both a Cisco Duo FOB and a standard ID badge. It requires the badge to have a hole in it for a lanyard loop.
Material: PLA, ABS/ASA, or PETG (preferred)
Print Settings: I printed these in PETG, 3 walls, 5 top and bottom layers, 0% infill, no supports.
Scaling: This badge holder was designed to be a snug fit, so that the ID card would not fall out on its own, even if unsecured via the lanyard. When printing in PETG, I needed to scale up a tiny bit in X and Y in order for the card to slide in and out without unreasonable force. I based this design off my specific ID card, so there will likely be tolerance differences with your card(s) that you will need to adjust for.