Sabrent USB Hub Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount is designed to grip the Sabrent 4-port switched USB3.0 hub available from Amazon.…
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 148
- Wydruki
- 1
- Wyświetlenia
- 1635
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This mount is designed to grip the Sabrent 4-port switched USB3.0 hub available from Amazon.
https://www.amazon.com/Sabrent-4-Port-Individual-Switches-HB-UM43/dp/B00JX1ZS5O
The hub snaps into place with two fins paired on the left and right sides of the body and is held in its sagittal position by two extrusions from the front and back.
Two mounting holes are cut into the base and should fit most standard American wood screws.
If you have a need to move the hub from its fixed position from time to time (I usually do for Arduino projects, etc.), this fixture should help by providing "snap-in, snap-out" behaviour.
Print Settings
Printer Brand:
Dremel Digilab
Printer:
3D45
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
5%
Notes:
Advise printing with PETG or other reasonably-flexible material.
Category: Organization