Fujifilm GFX100RF filter holder - clicks on the hood holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allow you to add filter or other accessories to the clickable hood holder. Its faster to switch between filters.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print settings
Nozzle size ......................... 0.4 mm
Layer height ....................... 0.1
Number of perimeters ... 2
Infill ...................................... 15%
Supports ............................. yes, the inner details print better
Bed surface ......................................... glue stick + brim (if PLA)
Hotend temp ...................................... 240c / 210
bed temp .............................................. 80c / 60
Materials used: .................................. PETG / PLA
Additionnal parts
fit gfx100rf only