1 / 2
Bayonet Connector for the Firstgizmo filament box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted something a little quicker for swapping between spools so I made a bayonet-style connector
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I mainly just used the screw point spacings in the remix, but I created a bayonet style connector for a regular threaded PTFE connector so you can hot swap between spools. I also made a plug (I printed in TPU) to keep the spool airtight after the swap. Use at your leisure!