1 / 2
Gridfinity bin for Aliexpress wire stripper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tight fit gridfinity bin for an Aliexpress brand wire stripper.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
It wasn't necessary to make it such a tight fit, but it was satisfying to make. Also to note: there's enough clearance to stack bins on top.
The whole thing doesn't fit on my print bed (251x125x40) so I cut it in half using the PrusaSlicer dovetail feature. You may need to right click → split → To objects. It fits together without any glue needed, you just have to gently tap it together. I've included both the pre-cut STLs and the entire thing. All up it's about ~180g to print, depending on your infill.