Headphone Holder - Clamps onto your desk! | Desk Headphone Clamp Mount Hook |For desks with a small edge | Two sizes availible | Edge Clamp Low Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NO SUPPORTS, NO EXTERNAL HARDWARE, ONLY 2 PARTS! Clamps onto desk as shown. Designed for desks with a small edge.
- Ocena
- 5 / 5
- Polubienia
- 209
- Pobrania
- 695
- Wydruki
- 3
- Wyświetlenia
- 3535
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Headphone holder for desks with small edges
If you can't find a headphone holder that clips on your desk because the edge is too small, this headphone holder is designed for desks with about a 15 mm (0.6 in) usable edge. The thickness of the desk should be 14 - 19 mm (0.55 - 0.75 in). The desk edge should be at least 13 mm (0.5 in)
No hardware required except what is in the files.
Optionally print the spacer or more importantly, wrench, to ensure the holder is clamped well.
Important:
If your printer is not as good, print the low tolerance bolt.
Regular tolerance bolt should work, but it might be difficult to get the thread started.
For best results:
Layer height: 0.2mm (recommended) or 0.15mm
Wall loops: 5
Infill: 15%, grid or gyroid
No supports
Required Print Orientation:

No AI was used in the making of this project. More images and new model coming soon.
Like what you see? Follow!