Pocket Operator bumper case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your Pocket Operator and make it easier to hold with this sleek two-piece case. It accommodates most plugs for…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 884
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Protect your Pocket Operator and make it easier to hold with this sleek two-piece case. It accommodates most plugs for the line-level audio jacks. If not, you can simply remove the top part of the case to facilitate cable ingress.
The case does not require any hardware to assemble, though after printing you will need to spend some time carefully removing supports from the PCB grooves around the edges.
And yes, you'll have to remove the hanger from the top of the Pocket Operator PCB. If you don't want to, you can still use the lower half of this design.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.20mm
Filament:
Prusament PLA
Galaxy Black
Category: Music