PositronV3 LGXLite Extruder Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is a simple add-on for the Positron V3 and its extruder.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This design is a simple add-on for the Positron V3 and its extruder. The original extruder tends to overheat, with the motor getting quite hot during operation. To solve this, I replaced it with the Bondtech LGX Lite extruder, which fits the available space nicely.
However, this modification prevents the printer from folding and fitting into a standard filament box. You’ll need to cut a small opening at the top of the box to make room for the extruder.
You’ll need:
4 × M3 countersunk screws
I hope you like my modification to the Positron and perhaps have some ideas for further improvements!