1 / 10
raspi 5 stock cooler 4010 fan mount — zdjęcie 1
1 / 10

raspi 5 stock cooler 4010 fan mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It is a mount that allows you to remove the stock cooler from the Raspberry Pi 5 and attach a 4010 fan instead.

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

This is a 4010 fan mount designed to replace the blower fan on the Raspberry Pi 5 stock active cooler. I made it because the temperature became too high while overclocking the Raspberry Pi 5.

Use M3 x 18mm bolts with M3 nuts to attach the 4010 fan, and reuse the original bolts to mount it onto the heatsink.

It was printed in Fusrock ABS, but due to the high temperature, I recommend printing it with PETG or a higher-temperature material.

Tagi