Big Carl Crane - Platform, Trucks and Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1/120 scale model of the Sarens SGC-250 crane.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 1039
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model of the largest land crane out there, the Sarens SGC-250, aka the Big Carl. Built by a Belgium company and shipped to Somerset, England to help build the Hinkley Point C nuclear reactor. How large is this crane? It can lift 5,000 tons or 10 million pounds. This rail crane rotates on circular rails and is unique in that it can switch over to straight line rails and move to three different rotation points. At a scale of 1/120, the model is about 1.3 meters long, 1.1 meters tall and 210mm wide. This scale was chosen as a balance between the amount of detail that can be modeled versus what can be printed on a standard 3D printer, in this case a Prusa Core One printer. It should be noted that to get some of the fine detail on some of the parts, a 0.25mm nozzle was used.
This model has a parts list that details the number of each part to print and the color to use along with an instruction manual. These along with the parts for the platform, platform equipment, trucks and base are included in this model.
NOTE: Due to the sheer number of parts and past issued with this site locking up I have separated out the gantry and boom parts into a second model, Big Carl Crane - Gantry and Boom.