Ender 3 BMG Direct Drive Bracket For Linear X Axis with 23mm pancake steppermotor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket that uses the original mount that comes with bmg clones. It is designed for Ender 3 w/ linear rails.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A bracket that mounts to the plastic mounting option that comes with most bmg clones and is intalled on the backplate of the extruder. Printed it using PETG with 40%infill. V2 should be fine with slightly less infill.
!Current Design limits X Axis movement by about 3cm! Will change the design for a 23mm pancake motor!
V3 Out now, requires some cutting. but works fine.
V3 works with a 23mm pancake stepper, just cut and sand the original bracket to sit flush with the motor and it should work fine. I printed the bracket in petg with 30% infill and it is rock-solid.