The Wago Shooter

Okay, cowboy, since you're reading this, I think you're like me. 
Every time you pick up a Wago terminal block (and you always have some in your pocket), you think, “What if...” 
Look no further. 
The answer is here. 
I tested it so you don't have to. 
You can turn Wagos into deadly projectiles using their own spring force. Okay, not quite that deadly, actually not deadly at all. There's not even any risk of pinching your finger on the orange lever, like you always do in your pocket. 

To build it, do the following:

• Print with 0.2 layers or better in the orientation provided in the .STLs . Look for the pictures if not sure.
• Assemble the parts by inserting 1.75 mm filament through the holes and then cutting it flush with a sharp side cutter. 
• If the holes are not large enough, drill them out with a 1.8 mm drill bit.
• Use a fresh, 3-pin Wago 221 terminal as a projectile. Not the old ones you've been carrying around with you for months. The springs won't do the job.

Don't target animals or relatives, only wiring problems of the nasty kind. I easily shot over a distance of 100 cm. How far can you go?