Creality K1C, K1SE, K1, brass nozzle brush holder on the CFS Kit holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
holder brass nozzle brush on the CFS Kit holder
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 844
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Держатель для латунный щётки, который прикручивается к poop shoot от cfs kit. Щетка расположена достаточно близко и задевает его при поднятии стола латунной частью, на печати никак не сказывается, только перед чисткой нужно будет опустить стол
Я распечатал PETG пластиком, но вам советую печатать из ABS. Модель печатается с поддержками
Модель была создана для k1se значит должна подойти также на k1c, k1,
!!!!не подходит под k1max!!!!
Если что-то нужно исправить, пожалуйста, напишите мне в Telegram @saturnechek
BOM
-Вплавляемая гайка OD 5мм
-Винт м3*5(для надежного крепления щетки)
-Винт м3*25(для крепление к poop shoot)
-Латунная щетка(понадобится обрезать рукоять, оставив только саму щетку)
A brass brush holder that screws onto the poop shoot from the CFS kit. The brush is located quite close and touches it when the table is raised with the brass part, it does not affect the printing in any way, but before cleaning you will need to lower the table
I printed with PETG, but I recommend printing with ABS. The model is printed with support.
The model was created for k1se, which means it is also necessary to rise to k1c, k1,
!!!!not suitable for k1max!!!!
If anything needs to be corrected, please message me on Telegram @saturnechek
BOM
-Felted nut OD 5mm
-M3*5mm screw (for secure brush attachment)
-M3*25mm screw (for mounting to the poop shoot)
-Brass brush (you will need to cut off the handle, leaving only the brush itself)
\
