Zogar's Revenge Game Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an insert for The Game Crafter's print-on-demand version of Zogar's Revenge by Jason Glover.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an insert for The Game Crafter's print-on-demand version of Zogar's Revenge by Jason Glover. It was designed in Tinker CAD. As long as it is not harassed too heavily, it can be stored vertically as well as horizontally. The map tiles are removed by pressing towards the edge, so you should not need to remove the tray to get them out. Scoot the folded paper manual towards the bottom to hold the large round tokens in place when storing vertically. Assuming everything prints okay, there should be no lid lift.
The example print is in California Filament Purple PETG @ .2mm with a .4mm nozzle.