1 / 3
Ball bearing trucks for Walthers 932-series Amfleets — zdjęcie 1
1 / 3

Ball bearing trucks for Walthers 932-series Amfleets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drop in and full replacement trucks with ball bearings for the Walthers 932-series Amfleets, HO scale

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
242
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

We all know the Walthers Amfleets roll like a brick.  The proto versions are newer yet they roll worse than the older 932-series cars.  So, why wait for Walthers new ball bearing trucks to be release sometime late next year and cost you $30 for a set… when you can print your own?

Requires 2.0x5.0x2.3 mm ball bearings, can easily find these on Amazon.  This model only works for the 932-series wheelsets as these have a 2mm diameter axle.  Find the insulated side of the wheel-set with the plastic hub and gently twist this off the axle.  Then apply two ball bearing sets and reapply the wheel.  Ensure you gauge the wheel-set correctly.

The first model is a drop in replacement that does not require modifying the Walthers car.

The second model requires cutting out the bolster as shown in the picture.  This new bolster will allow mounting of the detailed truck or Walthers proto trucks (if that's your thing).

updated detailed truck model on 11/9/2025

Design is optimized to be printed in PLA+ using a 0.2mm nozzle.

Best of luck, don't forget to tie down handbrakes on standing equipment, and enjoy smooooooth sailing.

Tagi