Minion - Skarn Bonebelt | 32mm & 75mm Fantasy Miniature | FDM & Resin

🪓 MINION: Skarn Bonebelt

“Skarn wears his kills. You next.”

Skarn is the tribe’s scavenger and bone-smith. His belt is strung with teeth, claws, and finger bones from past victims. He fights low and dirty, using a spiked club carved from petrified wood and reinforced with iron nails. Skarn’s favorite tactic is to cripple enemies before Gorgrak arrives to finish them.

Stat Block – CR 2

Traits & Actions:

• Crippling Blow: On hit, target must make DC 12 CON save or suffer -2 to movement until healed.

• Bone Trophy (Passive): Gains +1 AC for each enemy killed (max +3).

• Spiked Club: +5 to hit, 1d10 + 2 bludgeoning.

• Ambush Strike (Recharge 5–6): If attacking from cover or concealment, deals an extra 1d6 damage.

Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.

⚙ Print Specs

• Supports: Standard tree auto supports

• Category: Characters & Monsters

• Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

• Material: Resin or PLA+ for best detail retention

• Scale: Heroic 1:10 (adjustable for tabletop use)

• Orientation: Crouched pose with daggers supported

🧱 FDM Printing

• Use Tree Supports (Default) for optimal overhang coverage.

• Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

• Recommended materials: PLA+ or PETG for best surface finish.

• Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

• Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

• Layer Height: 0.05 mm

• Bottom Layers: 5

• Exposure Time: 2.75 s

• Bottom Exposure Time: 37 s

• Transition Layers: 10 (Linear)

• Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

• Anti‑Aliasing: Level 8

• Print Time Compensation: Enabled (0.93 s)

• Light PWM: 255

• Bottom Light PWM: 255

Supports & Orientation:

• Use Auto Orientation and Auto Supports (Light) in ChituBox.

• Ensure proper drainage and avoid flat surfaces directly on the build plate.