1 / 4
ACS towbar holder hole dust cover (parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ACS towbar holder hole dust cover, which fits better than the original one
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
- A replacement for the ACS original towbar holder hole dust cover, which is not holding very tightly in my car
- In case you want to change any of the sizes, change the parametric size in the model file - the most important parameters are in the ParamsSpreadsheet layer
- This model is made to fit very tightly - if you have troubles putting it in, I suggest to slightly lower (by 2 mm) the InnerX model parameter
- The original cover has more rectangular base, but in my case the almost square base covers the holder better
Printing tips
- No supports or infill needed
- Printed with Prusament PLA - Galaxy Black, but any other material/color should be fine