1 / 2
Shelly 2PM holder for LogiLink 1U PDU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holds a shelly 2PM to add power monitoring and switching capability to a logilink 1U PDU.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The original PDU has three “filler” caps, one with a power LED, those are not used afterwards.
Printed in (Sunlu) PETG, not PLA for heat reasons.
PDU i used: LogiLink Professional PDU9C03 https://www.amazon.de/dp/B078YRWSFC
The power rails inside the PDU can be cut and wired to the shelly 2PM as you want.
I decided to go for 3x always on, 3x shelly output 1 and 3x shelly output 2