Fubuki Iinchou Cosplay Helmet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable fox helmet for cosplay from Fubuki's iconic character in the HoloGTA collab
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
3D printable fox helmet for cosplay from Fubuki's iconic character in the HoloGTA collab.
Default sizing should work. Parts represent half the helmet, mirror to print other half.
All parts are split along color boundaries and named appropriately. I recommend using PETG, with organic supports, and either thermoplastic-specific glue and/or a soldering iron along the insides to connect all of the parts. All parts have an edge that can lay flat on the bed, designed for at least a ~250mm bed, a 235mm bed might work too.
I also recommend adding foam padding on the inside, and dessicant packets in the nose to soak up moisture. Might also have just enough room for a small fan. Can also make angled holes in the black nose pieces (in the slicer).
Strap holders should be glued on as convenient for you and depending on the kinds of straps you have. I recommend a 3-point system, similar to what's shown.
You can do anything you want to do with the files, as long as attribution is present.