Hypercube Evo Magnetic carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This carriage for the Hypercube Evo allows for quick toolchanges. I decided to design this because I tend to switch…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This carriage for the Hypercube Evo allows for quick toolchanges. I decided to design this because I tend to switch between regular and volcano hotends quite alot. This carriage makes that very easy by just disconnecting, and reconnecting some soldered on connectors for my pheriperals.
The magnets I have used in this system are Neodymium magnets with the size of D25*2
You can buy those magnets here: https://nl.aliexpress.com/item/4001134459009.html?spm=a2g0o.productlist.0.0.1b951e73bAq5WK&algo_pvid=98eb5373-4997-482d-b444-bcc0d101e4cb&algo_expid=98eb5373-4997-482d-b444-bcc0d101e4cb-1&btsid=2100bdde16111828028232822eb3d7&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Print Settings
Printer:
Hypercube EVO
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
any will do PETG or ABS
Any will do
Category: 3D Printer Parts