SimpleCore
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple CoreXY 220x220 3D priner
- Ocena
- 4,333 / 5
- Polubienia
- 300
- Pobrania
- 1444
- Wydruki
- 2
- Wyświetlenia
- 11 605
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to the SimpleCore 3D Printer, the latest version of my large 3D printer design. It's easy to build, budget friendly CoreXY 3D printer featuring the Eva3 toolhead platform and a Triple Z bed system. This printer is designed to be beginner friendly, cost effective and be a reliable workhorse.
HUGE thanks to Chaz for updating SimpleCore Legacy to this version!
SimpleCore is designed to use a modified EVA3 carriage to accept the A4T toolhead cowl
What's to like about SimpleCore?
- A build volume of around 215x220x220, can be increased in 50mm increments
- Linear Rails all around - All bearings on the gantry ride on 5mm pins instead of threads
- It is easily enclosable - Really easy to build!
If you want to seal SimpleCore with foam use the 7mm panel mounts
1mm VHB and 3mm Foam needed
For mounting a Meanwell PSU I just drilled holes in the bottom panel and used these:
https://www.printables.com/model/1537338-mean-well-lrs-200-bracket/files
When printing SimpleCore, please use these settings:
- 4 Walls - 4 Top / Bottom layers
- 30% Gyroid infill
- ASA/ABS are recommended, use PETG-CF as a minimum!
Links: