icom detachable faceplate wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found this mount listed for the IC-2730a (https://www.thingiverse.com/thing:4879947) and shaved the base in…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I found this mount listed for the IC-2730a (https://www.thingiverse.com/thing:4879947) and shaved the base in Tinkercad.
I have both the IC2730a and the ID-5100a and can confirm it fits both radios. It may fit others that take the MBA-2 or MBA-5 style faceplate mount, they both have the same spread on the mounting holes. I used the original icom screws that I had.
There are two versions of the wall plate, one with small holes and one sized for standard drywall screws.
No supports should needed if your printer is calibrated/tuned.
You can use less infill if wanted, it still printed around an hour for me.
Print Settings
Printer:
Custom Ender Extender
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
55
Filament:
Printed Solid Jessie PLA
Red
Category: Electronics