1 / 2
Electraft KX3 radio - LiPO Battery and Charger PCB Holder — zdjęcie 1
1 / 2

Electraft KX3 radio - LiPO Battery and Charger PCB Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These two pieces are used to modify a KX3 to hold a 3S LiPo battery and an internal charging PCB that mimic the charging

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

The two parts house a 3S LiPo Battery and a PCB I designed to allow for the internal charging of the battery much like is done in the KX2 radio.

This is remix of Stephan Gollubs original design.   I optimized the holder area for a little more clearance for the battery and expanded the right hand side to allow for the mounting of my PCB.

The battery retainer board was also modified squeak out a little more clearance as well.

Direction for installing my charging PCB mod are here.

Tagi