ATX Breakout Board Bar Nut Strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple nut strap for the XH-M229 power supply breakout board to help hold the nuts securely in place
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
I had a few spare PSUs sitting around and was looking for an easy way to turn them into benchtop powerstations when I ran across brotherchris’s and saltkunmazbeige’s designs. They were awesome and inspiring so I started to build my unit. When I got the XH-M229 board I found that the nuts on the terminals kept backing out when I would loosen or tighten them up. I quickly designed this strap, having done similar things in the past, to try to resolve this issue, and viola!
Parts
None, except for the XH-M229 breakout board to which this applies.
Assembly
Undo the backer nuts for the terminals from the backside of the breaker board, and then put the nut strap on the nuts between the terminals and the board, take the chance to tighten up the terminals themselves if loose, then tighten the backer nuts up again.
Attributions / Related Designs
My original design, but I was inspired by some great maker’s models:
https://www.thingiverse.com/thing:3518012
https://www.printables.com/model/501369-bench-power-supply-with-atx-psu-w-xh-m229sk35
Joke of the Design
Just a quick original joke to celebrate the posting of this new design (it helps if you have low expectations):
My wife was choking, so I hurried up and pushed her further underwater.
Now pick yourself up off the floor and GET PRINTING!