Apple Pencil 1st Gen. Magnetic holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic holder for Apple Pencil 1st Generation (Lightning) for iPad A16
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE V3: New version added. I observed, that the A16 iPad has not just 2 but 4 magnets to hold the Pencil! I updated the model accordingly. Also now the bottom is closed to avoid accidental scratches on the iPad. To put the magnets in, simply pause the print (the bottom layer is just 0.20 mm thick). The inner magnets have to be inserted in the opposite orientation than the outer magnets - check on the iPad first. Also the grip of the pencil was adjusted to be more firm.
UPDATE V2: I have added a bit refined V2 version of the holder. I fine-tuned the shape to make it more pleasing to the eye. I added a tiny chamfer to the edges and I have made the base a bit narrower.
When I upgraded my iPad 2019 to iPad A16 (2025) I didn't really want to upgrade my Apple Pencil to the USB-C one (which can magnetically stick to the iPad's side), because the 1st Gen was still working perfectly fine and has more features (pressure and tilt sensitivity). After a few months of using I was really upset with the lack of magnetism of the pencil.
That's why I decided to design a simple clip which would do the same.
I used two 4x2 mm magnets I bought from AliExpress which hold the pencil strong enough. The clip fits the pencil very snug and does not have to be removed to use the pencil to write/draw.
I printed this using Prusament PLA (Gravity Grey) on the default MK4S profile (0.20, SPEED with 15% infill).
I hope that some of you will be as happy as I am with the result.