Kudos Shower/Bath Screen Hinge Spring / Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3d printable replacement for the plastic Spring/Clip used in the hinge of the Kudos Inspire Bath/Shower Screen
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement part for the hinge on the Kudos Inspire Bath Screen / Shower Door. This part has a habit of failing after a few years in my experience. I made it by scanning a photo on the old one.
Best printed at 100% infill using PETG - Nylon would probably be better if you can have it. I used 0.15 Structural settings on my Prusa Core1 with a 0.4mm Nozzle. Might benefit from a smaller nozzle but I don't have one to hand.
I can't warrant how long it will last for but you can print A LOT for the cost of a new one.