Vise Jaws - Fiskars 9" Brush Axe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vise jaws to hold handle of 9" Fiskars Brush Axe while sharpening the blade.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are vise jaws to hold the handle of a Fiskars 9" brush axe while the blade is sharpened. I added 20mm x 10mm x 5mm magnets left over from another project. I have included file with no holes so that you may add magnets of your choice if desired.
These jaws may work with other Fiskars tools that have similar handle configuration. May work with some Gerber tools since Fiskars owns Gerber Blades, not to be confused with Gerber Foods owned by Nestle.
Printed on Creality S1 Plus, .2mm layer, 3 walls, 15% gyroid infill. Used PETG roll already mounted but PLA should be fine.