Mellanox CX311A single slot fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple fan mount for the mellanox connectx-3
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple fan support bracket for the Mellanox CX311A. I used a spare 4010 24V blower fan from an Ender 3 printer. The 24V fan allowed me to connect it to 12V, making it spin very slowly, yet it was still able to cool the card effectively.
If you want to replicate this mod, I suggest using two M3x8 screws and corresponding nylock nuts to attach the printed part to the card, and four M2 screws with locking nuts to secure the fan to the printed part. I routed the cable between the card and the printed part, and connected them on the PCIe side of the 12V fuse on the back of the card.
