1 / 3
Lens caps for the soviet PO-1M rifle scope
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple rifle scope lens cap.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I needed a simple set of caps to protect the sope from dust and debris. Didn't find any for my scope model so I made this. The front cap's inner diameter is 30mm and the rear cap's inner diameter is 32.7mm. I printed mine out of ABS. If using Orca slicer I recommend using a scarf seam. Concentric top infill pattern works nice for this model.