1 / 2
Fungineers Funwheel Thunder Rails Axle Bolts Cover Plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover plate for the axle bolt holes on the Fungineers Funwheel Thunder rails
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friction fit cover plate for the axle bolt holes on the Fungineers Funwheel Thunder rails. Three models included for the three different ride heights on these rails.
- Choose the High model when using the lowest holes
- Choose the Mid model when using the middle holes
- Choose the Low model when using the top most holes
The model has a lightning bolt on the surface that can be painted in your slicer for a multi color print.
The legs on the back call for #78 Danco O-Rings (4 total - 7/16" OD x ¼" ID x 3/32")
