1 / 6
Amigurumi Eyes with Flexible Cups – a choice of sizes — zdjęcie 1
1 / 6

Amigurumi Eyes with Flexible Cups – a choice of sizes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Eyes for your crochet figures: pick a size and print a pair!

Ocena
5 / 5
Polubienia
16
Pobrania
60
Wydruki
1
Wyświetlenia
275
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Introduction

Give your amigurumi characters expressive, securely mounted eyes!
These 3D-printed half-ball eyes feature a ridged stem and a matching TPU (flex) cup that locks them in place from the inside of the head. The flexible cup not only holds the eye firmly but also forms a gentle eye socket, keeping the eyes slightly recessed for a natural, finished look.

You can print the eyes in plain black for a classic bead-like appearance, or change filament colours mid-print to add depth and personality — for example:

  • Black pupil on a coloured iris
  • White eye bulb with coloured iris and black pupil

The parts are small, quick to print, and work beautifully with crocheted or knitted fabrics typical for amigurumi.

Models are provided for incremental sizes between 6 and 20 mm – that's the diameter of the eye. Drop me a note if you think another size should also be on offer.

Printing

For a complete eye you need to print the eye itself (PLA or PETG) and the cup that goes on the other side of the fabric (this must be flexible, ideally TPU). You will find two stl files for each size: one for the eye and another for the cup. On most occasions you will be printing pairs of both.

Eyes

0.4-mm nozzle is fine even for the smallest size. however I recommend printing the eyeball with a reduced layer thickness. I use custom range settings and print the eyeball with 0.1-mm layers, while the stem is easily printed at 0.2 mm.

The eyes should print stem-down, with supports. Be careful when separating the supports: the small sizes are ok but with larger diameter eyes it is easy to  break off the stem with the supports. What helped me was to increase pattern spacing in the support to 3 or even 4 mm.

Cups

The cups (eye sockets) are made of TPU. For me the material strings a lot, so I print them with the “Finish individual objects” feature to avoid having strings between them. No supports are necessary for the cups!

Installation

  1. Push the eye stem through the fabric.
  2. From the inside, align and press the TPU cup over the ridged stem until it snaps into place.
  3. The flexible cup pulls the eye gently inward, creating a recessed socket effect.

Tagi