Graham 1.5t model Tonearm Rest.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three piece detailed print. Works well. Hope this helps you!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I broke the tonearm rest on my Graham 1.5t model Toenarm during transport. Thankfully that is all that broke. With my 3d printer it is easily fixable. Not quite the same design of the original, but pretty dang close. I printed it in ABS, with Hatchbox black filament to match the original color. Uploading the g-code to that print and also a master file, so anyone can print what they want. Below is the screws I used to put the pieces together and the glue to join the cylinder to the base. It's great and quite sturdy!
Below is the link for the hardware and glue that worked best for me. The larger size is for the base, the smaller is for the pivoting arm. Happy Printing!
Affiliate links above. I may earn a small commission at no extra cost to you.