Creality CFS tensioner using POM wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This modification improves the retraction of the Creality CFS spool, especially when using lighter spools.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 259
- Wydruki
- 2
- Wyświetlenia
- 1095
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of the Creality CFS tensioner using POM wheels by 'vgergo' which is a remix of the model from the design by 'mdalacu'.
I really like this modification for the CFS keeping the spools from jumping up when retracting filament. My only problem was that vertical lips of the base easily snap off when you try to insert the original bumpers. So I redesigned the vertical lips to be stronger while still being able to flex so you can insert the bumper.
Also I changed the vertical holes so that they can be printed without supports using a bridge before the hole.
The rest of the files are unchanged.
Print settings:
Use 3 walls, 0,2 mm layer height and normal infill percentage with your favorite pattern.
Refer to the original for assembly instructions.